How can we help you today?

Start a new topic
Discussions FAB 3000 - Gerber/CAM Software FAB 3000 - Gerber/CAM Software

Is there a way to select all the silkscreen under my selected parameters and then change proprieties?

Hi, I contact you to ask a question about how to use FAB 3000
Every day I use FAB 3000 and many of the gerber files I check had the next problem, my manufacturer capabilities are silkscreen width over 0.15mm is ok, but I have to change manually every day the silkscreen that is under this width of 0.15mm.
Is there a way to select all the silkscreen under my selected parameters and then change proprieties?
I do this work manually every day and is very time consuming.
Thanks, thats all my question.
Best regards,
Roberto


1 Comment
Silkscreen (in Gerber files) is almost always drawn with traces (using aperture for the width).  You could create a selection filter, select all apertures less than 0.15mm, and change to a dcode with 0.155mm.  Here's a link showing how to use the selection filter,

Note:  We can automate this task in the next FAB 3000 update after running DFM Check.


Best regards,

Simon


Login or Signup to post a comment
More topics in FAB 3000 - Gerber/CAM Software
See all 977 topics