FAB3000 can extract the Paste Layer from your existing Mask and Drill layers.
Go to menu: Fabrication | Generate Paste Layer(s)... verify the options (see below), and press OK to create the Paste Layers.
Create Top Paste: Check this option if you wish to have a Top Paste layer generated. FAB3000 will determine if you have a Top Mask layer already, and if yes select this option.
Create Bottom Paste: Check this option if you wish to have a Bottom Paste layer generated. FAB3000 will determine if you have a Bottom Mask layer already, and if yes select this option.
Clearance from Mask: This is the annular ring between Mask and Paste. Default: 0
Maximum Pad Size: Assign the maximum Pad dimensions that will be referenced in your generated paste layer(s). Any Paste Pads with dimensions larger than this value are omitted. Default: 300 mils (7.62mm).
Pad Selection: Choose what Pad Mask object types will be referenced in your generated paste layer(s). Default: Flashes Only
Simon Garrison
FAB3000 can extract the Paste Layer from your existing Mask and Drill layers.
Create Top Paste: Check this option if you wish to have a Top Paste layer generated. FAB3000 will determine if you have a Top Mask layer already, and if yes select this option.
Create Bottom Paste: Check this option if you wish to have a Bottom Paste layer generated. FAB3000 will determine if you have a Bottom Mask layer already, and if yes select this option.
Clearance from Mask: This is the annular ring between Mask and Paste. Default: 0
Maximum Pad Size: Assign the maximum Pad dimensions that will be referenced in your generated paste layer(s). Any Paste Pads with dimensions larger than this value are omitted. Default: 300 mils (7.62mm).
Pad Selection: Choose what Pad Mask object types will be referenced in your generated paste layer(s). Default: Flashes Only