Does Fab 3000 import aperture lists automatically? I just tried importing some 274D files and it would not read in the aperture list.

Posted about 14 years ago by Numerical Support Team

Post a topic

You must be logged in to access this page

Numerical Support Team

Yes, FAB 3000 does read aperture lists (about 40 default), and then it has the Aperture Rules Wizard to allow it to load any aperture file.

Here's a 4 minute tutorial I created on YouTube showing exactly how to create an Aperture Rules File:

If you want to share your aperture rules files with others, it's easy. The Aperture Rule file are stored in the folder

...\Fab3000\aptrules

(A) You can either copy the file directly from there and distribute it, or

(B)

1. Start FAB 3000, and go to menu: Setup | Aperture Rules...

2. Press Button "Export Rules File...", and select the location for the Aperture Rules file.

To allow someone else to load your aperture list into FAB 3000, so it can be used try either:

(A) Copy the file directly into the folder ...\Fab3000V6\aptrules

(B)

1. Start FAB 3000, and go to menu: Setup | Aperture Rules...

2. Press Button "Import Rules File...", and select the Aperture Rules.

3. Press Button Save, and that's it.

Here's some links on the support forum:

Note: It's also described in the Help.

0 Votes

1 Comments

Danny Carr posted over 7 years ago

Please note, the above links have been updated. Please use the links below.

How do I Import an Old ORCAD Aperture List:
https://support.numericalinnovations.com/support/discussions/topics/14000002859

How can I import old Aperture files into FAB 3000:
https://support.numericalinnovations.com/support/discussions/topics/14000002845

0 Votes