I tried adding a pad by clicking on the “Pad” icon. It requests a location for the center but after I place it I do not see a pad. What am I missing? How do I size the pad and how do I assign it to a layer?
S
Simon Garrison
started a topic
almost 7 years ago
Here's a quick tutorial (no sound) which shows how to add a Pad.
Hint: FAB 3000 is a Gerber editor, which means when adding Pads or Traces you must first define the Aperture (i.e Shape/Size) and then select it. My guess is in your example the Pad was added, however you may have used a very small aperture.
Thanks again, and please let me know if that helps.
Simon Garrison
Here's a quick tutorial (no sound) which shows how to add a Pad.
https://numericalsoftware-update.s3.amazonaws.com/tutorials/2018-02-08_8-34-27_AddPad.mp4
Hint: FAB 3000 is a Gerber editor, which means when adding Pads or Traces you must first define the Aperture (i.e Shape/Size) and then select it. My guess is in your example the Pad was added, however you may have used a very small aperture.
Thanks again, and please let me know if that helps.
Best regards,
Simon